Set up network monitoring or man-in-the-middle on Raspberry Pi
Good network monitoring requires that as much of the traffic as possible be routed through the analysis or monitoring system. In order for this to succeed, the corresponding device is optimally placed in a network connection or between two endpoints.
task
- Create man-in-the-middle for network monitoring.
- Set up network monitoring.
If you operate Raspberry Pi as a WLAN bridge, then you can tap into all the data packets between the WLAN and the LAN. This Wi-Fi bridge is great for recording network traffic.
Solution: Man-in-the-Middle through ARP spoofing
In ARP spoofing, an attacker within a local network spends his or her own MAC address as that of another device. Thus, the attacker reaches the targeted redirection of network traffic to his analysis system.
The target of the attack may be all traffic on the local network or just a specific host.
- ARP Spoofing and Man-in-the-Middle with Raspberry Pi
If a Raspberry Pi has been placed in the man-in-the-middle position, it can be used to record network traffic. For example, to find errors in a network communication, to analyze the traffic or to better understand procedures.
- Record network traffic with Raspberry Pi (tcpdump)
- HTTP data analysis (urlsnarf)
- HTTP image data analysis (driftnet)
- Record access data in the network (dsniff)
Post A Comment:
0 comments: